Expert Answers about Chevrolet Hitch Pins and Clips
- Availability of the Lock N Roll Hitch Pin Clip
- I may have a solution for you, but there is not a replacement clip for this pin in this style. However you can use a standard hitch pin clip like the # C21600 and it will work just the same.
view full answer... - Availability of the Master Lock Pivot Lock Hitch Pin for a 2-1/2 inch Hitch Receiver
- Although we do have hitch pins that are compatible with 2-1/2 inch hitch receivers, the Master Lock Pivot Lock Hitch Pin, like part # ML1495DAT, is only available for 2 inch hitches.
If your concern is that you will lose the clip with a standard pin and clip like part # PC3 then I have a recommendation for you.
I recommend using a locking hitch pin, like part # TR63253, which has a bulky lock in the place of a clip. Not only will it be easier to find on the ground if you dropped it,...
view full answer... - Availability of Hitch Pin For 2 Inch Trailer Hitch Receiver
- The two sizes of hitch pins that I carry are 1/2 inch and 5/8 inch. A 2 inch hitch receiver will use the 5/8 inch hitch pin like the Hidden Hitch Pin and Clip, part # PC3. I am including a link to a page of the 5/8 inch hitch pins that I carry.
The Class I 1-1/4 inch hitch receivers will use the 1/2 inch hitch pin like the Draw-Tite Pin and Clip, part # PC2.
The Softride Replacement Hitch Bolt with Lock Washer, part # SR25879, that you have referenced will only fit the QuietRide stainless...
view full answer... - Can I Purchase the Curt Class I HItch 11110 Without the Ballmount and Pin and Clip
- The ballmount, pin and clip are packaged with the hitch and the installation hardware and we cannot separate them. Curt includes them, because on Class I and II hitches, only certain ball mounts should be used.
If you do not want a hitch with the draw bar and pin and clip, I would suggest Draw-Tite part # 24839.
Yes, you can use a load carrier or a cargo carrier on either of these hitches, so long as the cargo carrier is designed for use with 1-1/4 inch Class I hitches. The tongue weight...
view full answer... - Availability of Spindle Pin and Clip Replacement for the Pro Series Adjustable 3-Ball Mount
- The spindle pin and clip for the Pro Series Adjustable 3-Ball Mount for 2" Hitches # 63070 has a 3/8" diameter and while there aren't any replacements, when I reached out to my contact at Pro Series he mentioned that you can use a standard 3/8" pin to replace this one instead of purchasing a new platform # PS63075.
The closest thing we have that would fit is the Bulldog Adjustable Coupler Lock # BD580410 but it uses a 1/4" diameter pin so it won't fit as snug in that spindle pin location.
view full answer... - Do You Have a Spare Tire Carrier Designed for a 2 inch Receiver
- We do have a spare tire carrier that mounts into a 2 inch receiver. The Curt Trailer Hitch Mounted Spare Tire Carrier, part number C31006, is a very nice mount that is easy to use and can be used with locks to secure the spare to the carrier and the carrier to the vehicle.
You will need a hitch pin and clip or lock to secure the mount to the vehicle. Either the # PC3 Pin and Clip or the # 63232 Anti-Rattle Device and Lock would work well with this product and to secure the spare you could...
view full answer... - Hitch Pin for Use in 3-Inch Hitch Receiver on Ford F-250
- We do offer a specialized heavy-duty zinc hitch pin (with grip handle and included clip) for use in 3-inch hitch receivers such as the Super Titan 3000 Weld-on Trailer Hitch with 3-Inch Receiver Opening # 38023. The pin part number is # 58388 and it has an overall length of 6-inches. The linked video illustrates.
view full answer... - How to Attach a 1-1/4 Inch Hitch Bike Rack to a RV Bumper Hitch
- I would recommend to use the Brophy Hitch Reducer, part # HT02. This reducer will insert into a 2 inch hitch receiver on your RV and allow you use your 1-1/4 inch hitch bike rack. It will extend out from the original hitch pin hole an extra 3 inches. Hopefully, an extra 3 inches would not cause you any problems.
It comes with a 1/2 inch pin and clip for the hitch accessory, but you will also need a Hidden Hitch 5/8 Inch Pin and Clip, part # PC3 to attach the reducer to the hitch.
There...
view full answer... - Longest Available Receiver Hitch Pin Span Locking and Non-Locking
- The Draw-Tite Trailer Hitch Receiver Lock # 63259 is going to be our longest locking pin with a 4" usable length pin. We do have the Super Titan Trailer Hitch Pin and Clip # 58388 that is specific to the Reese Super Titan 3" receiver. This has a usable length of 6" but is not locking an had a 3/4" diameter specific to the Super Titan receiver.
view full answer... - Availability of 2 Inch Receiver Hitch for 2009 Toyota Matrix XRS
- There are no 2 inch hitches available for a 2009 Toyota Matrix, however we do have a solution for you. We have 1-1/4 inch hitches for your Matrix and a nice adapter for making your 2 inch bike rack work with 1-1/4 inch receivers.
First you will need a hitch. The Draw-Tite, part # 24812, has a high customer rating and would work just fine for a bike rack and includes a pin and clip. We even have a video of one of these hitches being installed on a 2009 Matrix, I have added a link to it.
Since...
view full answer... - Available Extra-Long 5th Wheel Hitch Mounting Pins
- You can use Reese 5th wheel hitch pin set # RP58467. These have a usable center span of 4-1/4-inches.
view full answer... - Long Shank Ball Mount for Added Clearance While Towing
- I'm assuming that you are asking about length of the ball mount and not the drop or rise. The Convert-A-Ball Ball Mount for 2" Hitches # AMSC4 is 12 1/4 inches in length from the end of the shank to the center of the ball hole, and 9 3/4" from hitch pin hole to the hitch ball hole. If you are needing a longer ball mount than that to have additional clearance we do have other options.
For a fixed ball mount that has close to the same ratings and rise and drop measurements I recommend Draw-Tite...
view full answer... - Anti-Rattle Hitch Lock & Hitch Cover for Reese 2-Inch Trailer Hitch Receiver
- The diameter hitch pin for a 2-inch hitch is 5/8-inch, very close to your 9/16-inch dimension. In this size we offer a plain pin/clip # PC3, locks such as # BD580412 and anti-rattle locks such as # 63232. This anti-rattle lock works in any hollow-shank ball mount or accessory carrier to both steady it and help protect it from theft.
I linked our main pages for 2-inch hitch covers, including plain rubber covers like # 22282 and # I-728 as well as themed covers.
view full answer... - Availability of Class V Hitch for 1997 Chevrolet C/K Series Pickup with 10-Inch Deep Drop Bumper
- We do offer a 2-inch Class V trailer hitch for your 1997 Chevrolet C/K Series Pickup with 10-Inch deep drop bumper. Curt hitch # C15317 offers a very substantial 2400-lb tongue weight capacity and a gross trailer weight rating as high as 17,000-lbs if used with weight distribution. If your truck carries a different weight rating then the lower-rated item becomes the overall limit.
This hitch installs without drilling or welding using the included hardware. Your spare tire will need to...
view full answer... - Availability of 2-Inch Hi-Rise Hitch Ball with 2-Inch Rise and 3/4-Inch Diameter Shank
- We offer a range of hi-rise hitch balls but none has a 3/4-inch diameter shank; all are 1-inch or 1-1/4-inch diameter. You can instead use a ball mount with the equivalent rise to accomplish the height adjustment you need.
If you have a 2-inch hitch receiver you can use Draw-Tite Ball Mount # 2753, which provides either a 2-3/4-inch rise or 4-inch drop. This ball mount uses a hitch ball with a 1-inch shank, such as Tow Ready # 19247. If you need a hitch pin and clip you can use Hidden...
view full answer... - What Trailer Hitch Receivers are Available for the 2014 Audi Q5
- As you noted we do offer several Class III hitches for the 2013 model year; these can be seen on the link provided. I am pleased to advise that my contact at Draw-Tite confirmed for me that their 2-inch hitch # 75940 will also fit the 2014 model year of the Q5.
I have linked an installation video as well as the written installation instructions for this item. Drilling is not required for installation but the exhaust must be lowered and lower fascia removed temporarily. If your Q5 has...
view full answer... - Availability of Hitch for 2007 Toyota Solara Sport Convertible
- According to Curt, the Class II hitch you referenced, part # C12110 will indeed fit your 2007 Toyota Solara Convertible Sport model.
If you were planning on using the hitch for towing, you will also need the following parts to complete your towing system:
• Wiring harness with trailer connector, part # C59236
• Ball mount, part # C45522
• Pin and Clip # F-4
• 1-7/8 inch trailer ball, part # 19256
• 2 inch trailer ball, part # 19258
• Locking hitch pin, part # e98879
For installation...
view full answer... - Replacement Socket Pins and Clips and L-Pins and Clips for Equal-i-zer Weight Distribution Systems
- We do carry each of the parts that are available in that pack; I'll list the parts for you below.
Replacement Socket Pin for Equal-i-zer Weight Distribution Systems # 90-03-9212 (only comes with 1)
Replacement Socket Pin Clip for Equal-i-zer Weight Distribution Systems # 90-04-9216
Replacement L-Pins and Clips for Equal-i-zer Weight Distribution Systems # EQ95-01-9430
view full answer... - Availability of Trailer Hitch for 2015 Mustang, 2015 VW GTI
- I spoke with my contact at Curt and there is a trailer hitch available for the 2015 VW GTI. You will want Curt Trailer Hitch # 11355. With this Class I trailer hitch you can use a bike rack that fits 1-1/4 inch receiver. You will be able to carry up to two bikes with a bike rack and this hitch. This hitch comes with a hitch, pin and clip.
view full answer... - Recommended Trailer Hitch for 2015 Audi Q7
- There are hitches available for the 2015 Audi Q7 and I recommend using the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13220 because of the durable powder coating that is used on Curt hitches; this will ultimately help prolong the life of your hitch by protecting it from rust and corrosion. This is a concealed cross tube hitch, so you'll get better ground clearance and a cleaner look compared to a hitch that is not concealed, and the 2" receiver makes it great for both towing...
view full answer...
Go To Results